Job Description

Summary

See below for important information regarding this job.

This job is open to

The public

U.S. Citizens, Nationals or those who owe allegiance to the U.S.

Clarification from the agency

This is a Direct Hiring Authority Notice open to the Public using the Streamlined DHA(DHA for certain Personnel of DOD).

Duties

• If selected at the GS-07, GS-09 or GS-11 level, the below responsibilities will be performed in a developmental capacity.
• Develops test plans to ensure proper testing techniques, device physics, and equivalency testing are conducted.
• Establishes test requirements/techniques according to theoretically proven means and by use of empirical methods and techniques.
• Interprets test results; plans and develops methods for use in the study of pass/fail trends; determines when problems exist with specification or standard test methods or procedures.
• Reviews, analyzes and evaluates technical engineering information in test reports and other pertinent technical documentation to determine failure or acceptability status.
• Communicates with the manufacturer or the laboratory of correct procedures to follow should failure occur while performing the tests, then determining recourse actions to take as appropriate.
• Prepare detailed cost estimates, correspondence, technical reports, estimates, fact sheets, status reports and schedules as required to complete project assignments.

Requirements

Conditions of employment

• Must be a U.S. citizen
• Tour of Duty: Flexible
• Security Requirements: Non-Critical Sensitive
• Appointment is subject to the completion of a favorable suitability or fitness determination, where reciprocity cannot be applied; unfavorably adjudicated background checks will be grounds for removal.
• Fair Labor Standards Act (FLSA): GS-07, GS-09, GS-11 Non-Exempt, GS-12 Exempt
• Selective Service Requirement: Males born after 12-31-59 must be registered or exempt from Selective Service.
• Recruitment Incentives: Not Authorized
• Bargaining Unit Status: Yes
• Pre-Employment Physical: Not Required
• Selectees are required to have a REAL ID or other acceptable identification documents to access certain federal facilities. See for more information.
• Defense Acquisition Workforce position. Must complete DoD certification and other requirements. See Addtl Info.

Qualifications

To qualify for a Mechanical Engineer, your resume and supporting documentation must support:



A. Basic Requirement:



A Bachelor's Degree or higher in professional engineering . To be acceptable, the program must: (1) be in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET) as a professional engineering curriculum; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.


OR



A combination of education and experience - college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying professional engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:


a. Professional Registration or Licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.


b. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.


c. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the Basic Requirements above. The courses must be fully acceptable toward meeting the requirements of a professional engineering curriculum as described in the Basic Requirements above.


d. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g. engineering technology physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.



B. Specialized Experience:


One year of specialized experience that equipped you with the particular competencies to successfully perform the duties of the position and is directly in or related to this position. In addition to meeting the Basic Requirement above, to qualify for the GS-07 grade level, specialized experience must be at the GS-05 grade level or equivalent under other pay systems in the Federal service, military or private sector. To qualify for the GS-09 grade level, specialized experience must be at the GS-07 grade level or equivalent under other pay systems in the Federal service, military or private sector. To qualify for the GS-11 grade level, specialized experience must be at the GS-09 grade level or equivalent under other pay systems in the Federal service, military or private sector. To qualify for the GS-12 grade level, specialized experience must be at the GS-11 grade level or equivalent under other pay systems in the Federal service, military or private sector. Applicants must meet eligibility requirements including minimum qualifications, and any other regulatory requirements by the cut-off/closing date of the announcement.


Creditable specialized experience includes:



GS-07:

• Collects technical information for any associated test project.
• Assists higher graded engineers in evaluating engineering drawings, blueprints and specifications.
• Performs and execute specific portions of engineering projects.
• Assists in the research of engineering issues on a wide variety of mechanical items.

GS-09:

• Independently reviews applicable drawings/specifications and prepares test plans for engineering technicians.
• Independently reviews test results and prepares test reports for customers.
• Assists higher level engineers with report quality checks.
• Assists higher level engineers with customer/contractor questions with regards to laboratory test methods and results.

GS-11:

• Analyzes technical engineering problems.
• Analyzes and study engineering and technical performance requirements for reliability, maintainability and availability.
• Analyzes and review manufacturing facilities.
• Tests and evaluates a variety of mechanical components.
• Applies concepts and practices associated with all aspects of the technical design and development process utilizing drawings of mechanical components.

GS-12:

• Interprets technical data packages to identify the critical characteristics of the part to be tested.
• Resolves conflicts with customers regarding test methods, procedures and interpretations of results.
• Analyzes material properties to ensure that mechanical devices and systems and their equipment and/or components function safely, reliably, efficiently, and economically.
• Applies the scientific principles, theories, methods, and processes used to conduct a systematic and objective inquiry, including collection, analysis, and interpretation of data, and reporting of results.
• Applies the principles, methods, and tools of quality assurance, quality control, process improvement, and reliability used to ensure that a mechanical component, project, or system meets technical requirements and standards.

Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.

Education

GS-12: Substitution of education may not be used in lieu of specialized experience for this grade level.


Are you using your education to qualify? You MUST provide transcripts or other documentation to support your educational claims. Unless otherwise stated: Unofficial transcripts are acceptable at time of application.


GRADUATE EDUCATION: One academic year of graduate education is considered to be the number of credits hours that your graduate school has determined to represent one academic year of full-time study. Such study may have been performed on a full-time or part-time basis. If you cannot obtain your graduate school's definition of one year of graduate study, 18 semester hours (or 27 quarter hours) should be considered as satisfying the requirement for one year of full-time graduate study.


FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show that the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university.

Additional information

Position requires DoD Acquisition Test and Evaluation(T), Foundational certification within required timeframes. Selectee must also achieve 80 hours of Continuous Learning Points (CLPs) every 2-years. Click here for more details and Resources.



For Important General Applicant Information and Definitions go to:



Reemployed Annuitants: This position does not meet criteria for appointment of Reemployed Annuitants. The DoD criteria for hiring Reemployed Annuitants can be found at:



Drug-Free Workplace Policy


The Defense Logistics Agency (DLA) is committed to maintaining a safe, drug-free workplace. All DLA employees are required to refrain from illegal drug use on and off duty. DLA conducts pre-employment, reasonable suspicion, post-accident, and random drug testing.


Applicants tentatively selected for employment in testing designated positions will undergo a urinalysis to screen for illegal drug use prior to appointment. Refusal to undergo testing or testing positive for illegal drugs will result in withdrawal of the tentative job offer and a six-month denial of employment with DLA from the date of the drug test. Employees in drug testing designated positions are subject to random drug testing.


The DLA drug testing panel tests for the following substances: marijuana, cocaine, opiates, heroin, phencyclidine, amphetamines, methamphetamines, fentanyl, norfentanyl, methylenedioxymethamphetamine (MDMA), methylenedioxyamphetamine (MDA), and opioids.



ADVISORY: Use of cannabidiol (CBD) products may result in a positive drug test for marijuana. DLA employees are subject to Federal law and under Federal law, Marijuana is a Schedule I drug and is illegal.


Additional guidance on writing a federal resume can be found at: USAJOBS Help Center - How do I write a resume for a federal job? The resume builder can help you create a resume using these recommendations and uses the information in your USAJOBS profile to help you get started.

Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution.

Benefits

A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.

Review our benefits

Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Direct Hire Evaluation: Once the application process is complete, a review of your application will be made to ensure you meet the job requirements. This vacancy will be filled through a Direct Hire Authority. All applicants who meet the basic qualification requirements will be forwarded to the Selecting Official for consideration. The rule of Three, Veteran's Preference and traditional rating and ranking of applicants do not apply to this vacancy. We will evaluate your application for basic eligibility and to determine if your experience meets the basic qualification requirements described in the announcement. All applicants who meet the qualifications and other basic requirement are eligible for referral and selection consideration. Please follow all instructions carefully. Errors or omissions may affect your rating.

Required Documents

To apply for this position you must provide a complete Application Package. Each Application Package MUST include:

• Your Resume: IMPORTANT UPDATE: Your resume must not exceed two (2) pages. If your resume exceeds the two-page limit, you will be removed from consideration for this announcement. The resume and required supporting documentation should provide the minimum qualifications and relevant experience for the announced position. Must include the work schedule, hours worked per week, dates of employment, and duties performed. If multiple resumes are submitted by an applicant, only the last resume submitted will be reviewed for qualifications and referred for selection consideration, if eligible. The resume must not be more than 5MB and should be saved and uploaded as a PDF to maintain formatting and number of pages. We also accept GIF, JPG, JPEG, PNG, RTF, TXT, PDF, ODT or Word (DOC or DOCX). We do not accept PDF portfolio files. Page margins should be 0.5 inches, and font styles must be legible. Consider using 14-point size font for titles and 10-point for the main text. We recommend using a font like Lato, if available. Other widely available options are Calibri, Helvetica, Arial, Verdana, Open San Source Sans Pro, Roboto or Noro Sans.

• Applicable documents to support the eligibility(s) for which you are applying. Please review the following link for a listing of the additional documents you will need to provide: Supporting Documents.

• If you are requesting a reasonable accommodation to the USA Hire Competency Based Assessments, submit documentation to support your request, including the Reasonable Accommodation Request Form found here.

If you are relying on your education to meet qualification requirements:

Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education.

Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.

How to Apply

Please read the entire announcement and all the instructions before you begin an application. To apply for this position, you must complete the initial online application, to include submission of the required documentation specified in the Required Documents section below. The complete application package must be submitted by 11:59 PM (ET) on the closing date of the announcement to receive consideration. The application process is as follows:

• To begin the application process, click the Apply Online button.

• Answer the questions presented in the application and attach all necessary supporting documentation. NOTE: Resumes up to a total of two pages will be accepted. Your resume must not exceed two (2) pages. If your resume exceeds the two-page limit, you will be removed from consideration for this announcement.

• Click the Submit Application button prior to 11:59 PM (ET) on 01/11/2026.

• After submitting your online application, you will be notified whether or not you are required to take any additional online assessments through the USA Hire Competency Based Assessment system. This message will be delivered to you both on screen and via email notification. The email may be routed to your "Spam" or "Junk" folder. If you do not receive the email invitation to the assessment and you meet the minimum qualifications for the position, you should contact to request the email be re-sent. Requests to re-send invitations to the USA Hire Competency Based Assessments must be received by BEFORE the close of the JOA.

• If you are asked to take the USA Hire Competency Based Assessments, you will be presented with a unique URL to access the USA Hire system. Access to USA Hire is granted through your USAJOBS login credentials. Be sure to review all instructions prior to beginning your USA Hire Assessments. Click here for Computer System Requirements .

• NOTE : Set aside at least 3 hours to take these assessments; however, most applicants complete the assessments in less time. If you need to stop the assessments and continue at a later time, you can re-use the URL sent to you via email and also found in your USAJOBS account under the "Track my application" link for the corresponding application.

You may update your application documents and some questions related to your personal information at any time during the announcement open period. However, you will not be able to make changes to questions related to assessing the minimum qualifications and competencies (knowledge, skills, abilities, and other characteristics) mentioned in the "How You Will Be Evaluated" section above. To make an allowed update to your application, return to your USAJOBS account ( There you will find a record of your application, the application status, and an option to Edit my application . This option will no longer be available once the announcement has closed.


To verify the status of your application both during and after the announcement open period, log into your USAJOBS account at On the Home page, scroll down and locate your job application. Once the job has been located, click the "Track this application" link on the right under the application date. The page will refresh to display the Agency's Application Information page where you can scroll down and review any notifications the agency has sent you. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit



Reasonable Accommodation (RA) Requests : If you believe you have a disability (i.e., physical or mental), covered by the Rehabilitation Act of 1973 as amended that would interfere with completing the USA Hire Competency Based Assessments, you will be granted the opportunity to request a RA in your online application. Requests for RA for the USA Hire Competency Based Assessments and appropriate supporting documentation for RA must be received prior to starting the USA Hire Competency Based Assessments. Decisions on requests for RA are made on a case-by-case basis. If you meet the minimum qualifications of the position, after notification of the adjudication of your request, you will receive an email invitation to complete the USA Hire Competency Based Assessments. You must complete all assessments within 48 hours of receiving the URL to access the USA Hire Competency Based Assessments if you received the link after the close of the announcement. To determine if you need a RA, please review the Procedures for Requesting a Reasonable Accommodation for Online Assessments here:


To preview the questionnaire, please go to

Agency contact information

DLA Weapons Support Columbus

Phone

614-692-0313

Email

DHRC-COLS@dla.mil

Address

DLA Weapons Support - Columbus
3990 East Broad Street
Columbus, OH 43213
US

Next steps

This job will close when the agency has received 100 applications, which may be sooner than the closing date.


If you meet the minimum qualifications of this position, you may be presented with instructions on how to access the USA Hire Competency Based Assessments (CBA) system. These additional online assessments must be completed within 48 hours following the close of this announcement unless you have requested Reasonable Accommodation for the USA Hire CBA. Your results will be kept on record for one year when applying for future jobs that require the same USA Hire CBA. NOTE: If the USA Hire CBA is altered within a year of your last application, you will be required to take the new USA Hire CBA. If no additional online assessments are required you will receive an OPM notification stating "It has been determined that you have completed all required online assessments and your application is complete. No further action is required."


Once you successfully complete the application process, you will receive a notification of receipt. Your application package will be reviewed to ensure you meet the basic eligibility and qualifications requirements, and you will receive a notification. A review may be completed of your online questionnaire and the documentation you submitted to support your responses. Applicants that are found qualified may be referred to the hiring official for consideration, and you will receive a notification of referral. The selecting official may choose to conduct interviews, and as part of the selection process, applicants may be required to complete additional supplemental documents. Once the selection is made, you will receive a notification of the decision. If interviews are conducted, DLA uses a technique called Behavior Based Interviewing (BBI). Be sure to check your USA Jobs account for your notification updates.

Overview

Accepting applications

Open & closing dates

12/19/2025 to 01/11/2026

This job will close when we have received 100 applications which may be sooner than the closing date. Learn more

Salary

$52,132 to - $120,222 per year

Pay scale & grade

GS 7 - 12

Location

1 vacancy in the following location:

Whitehall, OH

Remote job

No

Telework eligible

Yes—as determined by the agency policy.

Travel Required

25% or less - You may be expected to travel for this position.

Relocation expenses reimbursed

No

Appointment type

Permanent

Work schedule

Full-time

Service

Competitive

Promotion potential

12

Job family (Series)

• 0830 Mechanical Engineering

Supervisory status

No

Security clearance

Other

Drug test

No

Financial disclosure

No

Bargaining unit status

Yes

Announcement number

DLAWpnSpt-26-12847184-DHA

Control number

852895200

Job Tags

Permanent employment, Full time, For contractors, Internship, Remote work, Relocation, Flexible hours,

Similar Jobs